Flexicut
Micro-cutting machine dedicated to PCB and flat samples. A compact machine designed for cutting PCBs (Printed Circuit Boards) and flat samples. There are three modes of cutting:
• Longitudinal mode: for sectioning PCBs
• Fixed mode: for sectioning PCBs
• Micro-sectioning mode
MINITECH 250 SP1
MINITECH 250 SP1 is a manual polishing machines equipped with a Ø 200 to 250 mm platen. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range
on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
MINITECH 300 SP1
MINITECH 300 SP1 is a manual polishing machines equipped with a Ø 250 to 300 mm platen. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range
on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
MECATOME T265
Robust, the MECATOME T265 accepts cutting discs of Ø250 & Ø300mm. Its rotation speeds ranged from 1300 to 4000 RPM allow the use of metallic blades as resinoids. Its L-shaped table allows quick clamping of parts either horizontally or vertically.
Options and accessories:
- Magnetic filter (ref. 51271)
- Quick-release nut - Tool-less cut-off wheel change (ref. 51272)
- SUCTION AND EXTRACTION - Mist extraction with fluid recovery (ref. 51273)
- Base cabinet for manual cutting machine (small model) (ref. 51275)
- Left quick clamping vice (ref. 51280)
- Right quick clamping vice (ref. 51281)
- Stainless steel v-type moving jaw for clamping vice 45mm height (ref. 51282)
- Special fragile samples «delrin» thermoplastic moving jaw for clamping vice 45mm height (ref. 51283)
MINITECH 250 DP1
The MINITECH 250 DP1 is a manual polishing machine equipped with two platens Ø 200 to 250 mm and one motor. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
MINITECH 250 DP2
The MINITECH 250 DP2 is a manual polishing machine equipped with two platens Ø 200 to 250 mm and two motors. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
MINITECH 300 DP1
The MINITECH 300 DP1 is a manual polishing machine equipped with two platens Ø 250 to 300 mm and one motor. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
Mecatome ST310
Manual cutting machine with swing action movement. The MECATOME ST310 is a powerful and robust machine, designed to cut sections from sizeable parts and samples which are longer in length. Equipped with exclusive PRESI swing arm technology, rapid, clean, and effortless sectioning can be carried out, without any risk of burning the sample, resulting in a time saving of up to 60%. This new technology increases the capacity of longitudinal sectioning. The machine’s design means that large volume samples can be accommodated, and the double run of the ‘rod’ enables the sectioning of longer samples to take place. The table (with interchangeable stainless steel plates) is compatible with most readily available clamping systems (including vice-type rapid clamping systems and KOPAL). The cooling tank, equipped with a removable and washable filtration system, guarantees a clean supply of coolant during the cutting process, resulting in perfectly white sections.
MINITECH 300 DP2
The MINITECH 300 DP2 is a manual polishing machine equipped with two platens Ø 250 to 300 mm and two motors. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
Le Cube
The ideal solution for basic polishing operations. LE CUBE is a Ø 200 and 250mm manual polishing machine. Simple, reliable and sturdy, it is the ideal solution for laboratories, schools or research centres. Equipped with a frequency inverter, LE CUBE has a high-torque motor turning either clockwise or counter-clockwise. The polishing plate is equipped with two speed rotation settings (150 & 300 RPM). The multi-jet water spray ensures the optimum lubrication of the platen surface. With its removable platen the cleaning of the machine is very easy. LE CUBE is dust free thanks to the clear integrated hood. LE CUBE direct transmission on bearings confers an incomparable silence in use. LE CUBE can be used with any type of polishing surface: non-adhesive, adhesive, PRESI Reflex System and magnetic. No particular adaptation is required.