Showing all 6 results

Show sidebar


Ref. 51800
Price on request
Micro-cutting machine dedicated to PCB and flat samples. A compact machine designed for cutting PCBs (Printed Circuit Boards) and flat samples. There are three modes of cutting: • Longitudinal mode: for sectioning PCBs • Fixed mode: for sectioning PCBs • Micro-sectioning mode


Ref. 51760
Price on request
The MECATOME T205 is a manual precision micro-cutting machine characterized by its robustness and compact design. With a large working space, it allows for cuts with the highest precision and to work on a wide range of materials, from the softest to the hardest. Its powerful motor makes it possible to work at high and constant torque over the entire speed range from 100 to 4000 RPM. Option:
  • Quick-release nut - Tool-less cut-off wheel change (ref. 51725)


Ref. 51270
Price on request
Robust, the MECATOME T265 accepts cutting discs of Ø250 & Ø300mm. Its rotation speeds ranged from 1300 to 4000 RPM allow the use of metallic blades as resinoids. Its L-shaped table allows quick clamping of parts either horizontally or vertically. Options and accessories:
  • Magnetic filter (ref. 51271)
  • Quick-release nut - Tool-less cut-off wheel change (ref. 51272)
  • SUCTION AND EXTRACTION - Mist extraction with fluid recovery (ref. 51273)
  • Base cabinet for manual cutting machine (small model) (ref. 51275)
  • Left quick clamping vice (ref. 51280)
  • Right quick clamping vice (ref. 51281)
  • Stainless steel v-type moving jaw for clamping vice 45mm height (ref. 51282)
  • Special fragile samples «delrin» thermoplastic moving jaw for clamping vice 45mm height (ref. 51283)

Mecatome T330

Ref. 50300
Price on request
Medium size manual and automatic cutting machine. The spacious MECATOME T330 is a powerful and robust machine which can accommodate very sizeable parts and samples which are longer in length, made from a wide range of materials. The optional X axis drive gives the possibility of carrying out multiple series sectioning. There are four cutting modes: • Manual. • Assisted: a manual cut can be made using the joystick to pilot the table (effortless for the operator). • Automatic: an automatic cut can be made by selecting both the disc rotation speed and the advance speed of the table. Possibility of an impulse cutting mode. • Programmable: an automatic cut can be made using pre-selected parameters. The table (with interchangeable stainless steel pallets) is compatible with most readily available clamping systems.

Mecatome ST310

Ref. 50200
Price on request
Manual cutting machine with swing action movement. The MECATOME ST310 is a powerful and robust machine, designed to cut sections from sizeable parts and samples which are longer in length. Equipped with exclusive PRESI swing arm technology, rapid, clean, and effortless sectioning can be carried out, without any risk of burning the sample, resulting in a time saving of up to 60%. This new technology increases the capacity of longitudinal sectioning. The machine’s design means that large volume samples can be accommodated, and the double run of the ‘rod’ enables the sectioning of longer samples to take place. The table (with interchangeable stainless steel plates) is compatible with most readily available clamping systems (including vice-type rapid clamping systems and KOPAL). The cooling tank, equipped with a removable and washable filtration system, guarantees a clean supply of coolant during the cutting process, resulting in perfectly white sections.

EVO 400

Ref. 50400
Price on request
Large size cutting machine. Evo 400 Ref. 50400 / Evo 400+ Ref. 50430 The EVO 400 is a very spacious, large capacity machine. The height of the space under the grinding wheel measures 190mm. Its tables can bear the weight of parts over 200kg. This powerful machine, adapted for workshop use, combines ease of use with sturdiness. It has three cutting modes: assisted, automatic, programmable (ensures cut repeatability). Its ergonomic design, with a motorised hood and multilingual, coloured, touch screen simplifies the user-machine interface. Optional Extras: • Positioning Laser. • Manual transverse movement table (X axis) to assist with lateral adjustment of the simple, and enable parallel sectioning. • Manual longitudinal movement table (Y axis) to increase cut capacity.