Mounting mould polyéthylène ⌀ 25 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould polyéthylène ⌀ 30 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould polyéthylène ⌀ 40 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould rubber silicone ⌀ 25 mm
Box of 5 moulds. One piece. Reusable.
Mounting mould rubber silicone ⌀ 30 mm
Box of 5 moulds. One piece. Reusable.
Mounting mould rubber silicone ⌀ 40 mm
Box of 5 moulds. One piece. Reusable.
Mounting mould rubber silicone rectangular 100 x 50 x 25 mm
Box of 5 moulds. One piece. Reusable.
Mounting mould rubber silicone rectangular 55 x 30 x 25 mm
Box of 5 moulds. One piece. Reusable.
Mounting mould rubber silicone rectangular 70 x 40 x 25 mm
Box of 5 moulds. One piece. Reusable.
Mounting mould teflon ⌀ 20 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould teflon ⌀ 25 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould teflon ⌀ 25,4 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould teflon ⌀ 30 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould teflon ⌀ 31,7 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould teflon ⌀ 38,1 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould teflon ⌀ 40 mm
Box of 5 moulds. Detachable base. Reusable.
Mounting mould teflon ⌀ 50 mm
Box of 5 moulds. Detachable base. Reusable.
Poly’Vac
Vacuum impregnation system. The vacuum mounting system provides for improved resin impregnation of porous materials. Its best use is with epoxy resins. The device can be manually operated or programmed and controlled through a touch screen with options for setting cycle time (timer from one minute to several hours) and various levels of vacuum. It includes a resin dispenser.
Pressure vessel for mounting under pressure
The vessel for mounting under pressure can dramatically improve the quality of acrylic mounts. Resin type KM becomes more transparent and resin type KM-U has reduced shrinkage. Additionally, improved resin impregnation of porous materials can be achieved.