MECATECH 334 SPC
Single station, automatic polishing machine. Equipped with a Ø 250 to 300mm platen, the MECATECH 334 SPC is a powerful and reliable polishing machine with the most advanced technologies for easy operation and easy maintenance. It gives the best polishing results on all types, sizes and number of samples.
VIBROTECH 300
The automatic vibration polishing machine. The VIBROTECH 300 is a vibrating polishing machine of Ø 305mm reliable and robust. Vibration polishing is an ultra-soft technique suitable for the super-finishing stages and particularly for the samples to be analysed
in EBSD (electron backscatter diffraction) or AFM (atomic force microscopy). This polishing method makes it possible to save inclusions and to eliminate surface hardening. Very easy to use, the frequency and amplitude of the vibrations can be modified in real time.
Le Cube
The ideal solution for basic polishing operations. LE CUBE is a Ø 200 and 250mm manual polishing machine. Simple, reliable and sturdy, it is the ideal solution for laboratories, schools or research centres. Equipped with a frequency inverter, LE CUBE has a high-torque motor turning either clockwise or counter-clockwise. The polishing plate is equipped with two speed rotation settings (150 & 300 RPM). The multi-jet water spray ensures the optimum lubrication of the platen surface. With its removable platen the cleaning of the machine is very easy. LE CUBE is dust free thanks to the clear integrated hood. LE CUBE direct transmission on bearings confers an incomparable silence in use. LE CUBE can be used with any type of polishing surface: non-adhesive, adhesive, PRESI Reflex System and magnetic. No particular adaptation is required.
Electer Evolution
Portable apparatus for mechanical grinding and polishing ‘in-situ”. The ELECTER EVOLUTION is ideal for preparation of surfaces before chemical etching or polishing and electrolytic etching. • Strong case for transport.
• Control panel.
• Electronic speed control.
• 2 outlets for motor connection.
• Selection of rotation direction.
• Torque motor 1500 to 25000 RPM.
• Reducer 1/4 increasing the power by 4.
• Tool holder with 90° bevel gear.
• Voltage: 220 Volts.
• Built in accordance with EC standards.
Power supply
• Input 220 volts single phase 50 or 60 Hz.
• Adjustable output from 0 to 100 volts, with display of voltage.
• Direct current rectified by silicon diodes.
• Ammeter with 2 ranges, 0 to 10 and 0 to 20 Amp.
• Programmation managed by PLC with memorization of the polishing and etching ranges.
• 2 timers, polishing and etching.
• Rear output to electro-polishing unit and front connector for work with special clamp-type holder.
• Time delays for starting and electrolyte flow control.
• Built in accordance with EC standards.