Manual cutting machine with vertical and horizontal clamping system. The MECATOME T260 is a powerful and precise cutting machine designed for sectioning medium sized samples from a wide variety of materials of differing hardness, from the hardest to the softest. It provides maximum ﬂexibility, with a cutting table which allows clamping of the sample in either the vertical or the horizontal plane. In this way it can adapt to all sample shapes. Can be used with both vice-type clamping systems and KOPAL. The motor/cutting disc assembly of this machine articulates around 4 bearings, which allows for clean, precise sectioning cuts, and reduces effort for the user at the same time.
Medium size manual and automatic cutting machine. The MECATOME T300 is a powerful and robust machine, designed to cut sections from sizeable parts and from samples which are longer in length, from a wide range of materials. As well as allowing for the sectioning of voluminous parts, its design also offers the possibility of rod sectioning. It is compatible with all clamping systems (including vice-type rapid clamping systems and KOPAL).
Medium size manual and automatic cutting machine. The spacious MECATOME T330 is a powerful and robust machine which can accommodate very sizeable parts and samples which are longer in length, made from a wide range of materials. The optional X axis drive gives the possibility of carrying out multiple series sectioning. There are four cutting modes: • Manual. • Assisted: a manual cut can be made using the joystick to pilot the table (effortless for the operator). • Automatic: an automatic cut can be made by selecting both the disc rotation speed and the advance speed of the table. Possibility of an impulse cutting mode. • Programmable: an automatic cut can be made using pre-selected parameters. The table (with interchangeable stainless steel pallets) is compatible with most readily available clamping systems.
Manual cutting machine with swing action movement. The MECATOME ST310 is a powerful and robust machine, designed to cut sections from sizeable parts and samples which are longer in length. Equipped with exclusive PRESI swing arm technology, rapid, clean, and effortless sectioning can be carried out, without any risk of burning the sample, resulting in a time saving of up to 60%. This new technology increases the capacity of longitudinal sectioning. The machine’s design means that large volume samples can be accommodated, and the double run of the ‘rod’ enables the sectioning of longer samples to take place. The table (with interchangeable stainless steel plates) is compatible with most readily available clamping systems (including vice-type rapid clamping systems and KOPAL). The cooling tank, equipped with a removable and washable ﬁltration system, guarantees a clean supply of coolant during the cutting process, resulting in perfectly white sections.