Flexicut
Micro-cutting machine dedicated to PCB and flat samples. A compact machine designed for cutting PCBs (Printed Circuit Boards) and flat samples. There are three modes of cutting:
• Longitudinal mode: for sectioning PCBs
• Fixed mode: for sectioning PCBs
• Micro-sectioning mode
MINITECH 250 SP1
MINITECH 250 SP1 is a manual polishing machines equipped with a Ø 200 to 250 mm platen. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range
on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
Semi-automatic Hardness tester HZ10-2
Semi-automatic hardness tester. Optical quality, reliability and precision. The HZ10-2 hardness tester is instantly recognizable. 100% made in France, its original design along with its robustness and highly technical capacities make it an essential work tool. High rigidity of the chassis for a perfect load application.
- Load range : 10gf-10kgf
- Turret: : up to 4 lenses, 2 indenters, 1 touch sensor
- Indenter type : Vickers or Knoop
- 1 load cell
- Nikon objectives for a magnification up to 2000x
- Silent operation
- Major vertical extension: allows a large work space
- 2 LED lighting system: for micro and macroscopy use
- Fixed or manual stage
Key word: hardness
Mecatome T210
Precision automatic micro-cutting machine. A powerful and precise micro-machine designed for sectioning medium sized samples from a wide variety of materials of differing hardness, from the hardest to the softest. The optional X axis drive gives the possibility of carrying out multiple series sections. There are three modes of cutting:
• Assisted: a manual cut can be made using the joystick to pilot the table (effortless for the operator)
• Automatic: an automatic cut can be made by selecting both the disc rotation speed and the advance speed of the table. Possibility of an impulse cutting mode.
• Programmable: an automatic cut can be made using pre-selected parameters.
The grooved table (with interchangeable stainless steel pallets) is compatible with most readily available clamping systems.
MECATOME T265
Robust, the MECATOME T265 accepts cutting discs of Ø250 & Ø300mm. Its rotation speeds ranged from 1300 to 4000 RPM allow the use of metallic blades as resinoids. Its L-shaped table allows quick clamping of parts either horizontally or vertically.
Options and accessories:
- Magnetic filter (ref. 51271)
- Quick-release nut - Tool-less cut-off wheel change (ref. 51272)
- SUCTION AND EXTRACTION - Mist extraction with fluid recovery (ref. 51273)
- Base cabinet for manual cutting machine (small model) (ref. 51275)
- Left quick clamping vice (ref. 51280)
- Right quick clamping vice (ref. 51281)
- Stainless steel v-type moving jaw for clamping vice 45mm height (ref. 51282)
- Special fragile samples «delrin» thermoplastic moving jaw for clamping vice 45mm height (ref. 51283)
MINITECH 300 SP1
MINITECH 300 SP1 is a manual polishing machines equipped with a Ø 250 to 300 mm platen. It has the most advanced technologies. Thanks to a motor power from 750W to 1500W, the entire PRESI experience is condensed in this most complete range
on the market. User-friendly, reliable and robust, MINITECH provides a simple answer to all needs. With its affirmed style and edged lines, this new range is distinguished by its new design with an easily recognizable sleek and refined carbon look.
Semi-automatic Hardness tester HZ30-2
Semi-automatic hardness tester. Optical quality, reliability and precision. The HZ30-2 hardness tester is instantly recognizable. 100% made in France, its original design along with its robustness and highly technical capacities make it an essential work tool. High rigidity of the chassis for a perfect load application.
– Load range : 100gf-30kgf
– Turret: : up to 4 lenses, 2 indenters, 1 touch sensor
– Indenter type : Vickers or Knoop
– 1 load cell
– Nikon objectives for a magnification up to 2000x
– Silent operation
– Major vertical extension: allows a large work space
– 2 LED lighting system: for micro and macroscopy use
– Fixed or manual stage
Key word: hardness
Automatic Hardness tester HZ2-4
Automatic hardness tester. Optical quality, reliability and precision. The HZ2-4 hardness tester is instantly recognizable. 100% made in France, its original design along with its robustness and highly technical capacities make it an essential work tool. High rigidity of the chassis for a perfect load application.
- Load range : 5gf-2kgf
- Turret: : up to 4 lenses, 2 indenters, 1 touch sensor
- Indenter type : Vickers or Knoop
- 1 load cell
- Nikon objectives for a magnification up to 2000x
- Ergonomic joystick with customizable sensitivity
- Silent operation
- Major vertical extension: allows a large work space
- 2 LED lighting system: for micro and macroscopy use
- Standard or marble motorized stage
Key word: hardness