Resinoid cut-off wheels Type AO ⌀ 150 x 0,5 x 12,7 mm
Pack of 10 cut-off wheels. For cutting treated steels, stainless steels, refractory metals, alloyed cast irons.
Resinoid cut-off wheels Type AO ⌀ 125 x 0,5 x 12,7 mm
Pack of 10 cut-off wheels. For cutting treated steels, stainless steels, refractory metals, alloyed cast irons.
Resinoid cut-off wheels Type A ⌀ 450 x 3,5 x 32 mm
Pack of 10 cut-off wheels. For cutting low carbon, mild and extra mild and treated steels with medium cross-sections.
Resinoid cut-off wheels Type A ⌀ 400 x 3 x 32 mm
Pack of 10 cut-off wheels. For cutting low carbon, mild and extra mild and treated steels with medium cross-sections.
Resinoid cut-off wheels Type A ⌀ 350 x 2,5 x 32 mm
Pack of 10 cut-off wheels. For cutting low carbon, mild and extra mild and treated steels with medium cross-sections.
Resinoid cut-off wheels Type A ⌀ 300 x 2 x 32 mm
Pack of 10 cut-off wheels. For cutting low carbon, mild and extra mild and treated steels with medium cross-sections.
Resinoid cut-off wheels Type A ⌀ 250 x 1,6 x 32 mm
Pack of 10 cut-off wheels. For cutting low carbon, mild and extra mild and treated steels with medium cross-sections.
Resinoid cut-off wheels Type A ⌀ 100 x 0,3 x 12,7 mm
Pack of 10 cut-off wheels. For cutting low carbon, mild and extra mild and treated steels with medium cross-sections.
MECATOME T265
Robust, the MECATOME T265 accepts cutting discs of Ø250 & Ø300mm. Its rotation speeds ranged from 1300 to 4000 RPM allow the use of metallic blades as resinoids. Its L-shaped table allows quick clamping of parts either horizontally or vertically.
Options and accessories:
- Magnetic filter (ref. 51271)
- Quick-release nut - Tool-less cut-off wheel change (ref. 51272)
- SUCTION AND EXTRACTION - Mist extraction with fluid recovery (ref. 51273)
- Base cabinet for manual cutting machine (small model) (ref. 51275)
- Left quick clamping vice (ref. 51280)
- Right quick clamping vice (ref. 51281)
- Stainless steel v-type moving jaw for clamping vice 45mm height (ref. 51282)
- Special fragile samples «delrin» thermoplastic moving jaw for clamping vice 45mm height (ref. 51283)
Mecatome T210
Precision automatic micro-cutting machine. A powerful and precise micro-machine designed for sectioning medium sized samples from a wide variety of materials of differing hardness, from the hardest to the softest. The optional X axis drive gives the possibility of carrying out multiple series sections. There are three modes of cutting:
• Assisted: a manual cut can be made using the joystick to pilot the table (effortless for the operator)
• Automatic: an automatic cut can be made by selecting both the disc rotation speed and the advance speed of the table. Possibility of an impulse cutting mode.
• Programmable: an automatic cut can be made using pre-selected parameters.
The grooved table (with interchangeable stainless steel pallets) is compatible with most readily available clamping systems.
Flexicut
Micro-cutting machine dedicated to PCB and flat samples. A compact machine designed for cutting PCBs (Printed Circuit Boards) and flat samples. There are three modes of cutting:
• Longitudinal mode: for sectioning PCBs
• Fixed mode: for sectioning PCBs
• Micro-sectioning mode