Diamond cut-off wheels Type LR ⌀ 100 x 0,5 x 12,7 mm
Delivered with a dressing stick. Resin bond. High concentration disc, advised when you want the best cutting quality. To cut hard and fragile materials, composites, plasma deposit, ceramics, electronic components.
Diamond cut-off wheels Type LM ⌀ 150 x 0,6 x 12,7 mm
Delivered with a dressing stick. Metallic bond. Very polyvalent cut-off wheel, normal concentration, to cut very hard materials such as: ceramics, composites, alumina, sintered carbides, minerals, concretes, stones.
Diamond cut-off wheels Type LM ⌀ 100 x 0,3 x 12,7 mm
Delivered with a dressing stick. Metallic bond. Very polyvalent cut-off wheel, normal concentration, to cut very hard materials such as: ceramics, composites, alumina, sintered carbides, minerals, concretes, stones.
Resinoid cut-off wheels Type MNF ⌀ 250 x 1,6 x 32 mm
Pack of 10 cut-off wheels. For cutting aluminium, copper and alloys, non ferrous metals, titanium and alloys.
Resinoid cut-off wheels Type MNF ⌀ 200 x 1,6 x 25,4 mm
Pack of 10 cut-off wheels. For cutting aluminium, copper and alloys, non ferrous metals, titanium and alloys.
Resinoid cut-off wheels Type AO ⌀ 200 x 1,6 x 25,4 mm
Pack of 10 cut-off wheels. For cutting treated steels, stainless steels, refractory metals, alloyed cast irons.
MECATOME T305
Robust and flexible, the MECATOME T305 accepts Ø 250 & Ø 300 mm cut-off wheels.
Its rotation speeds range from 1000 to 4000 RPM, allowing the use of metal discs as well as resinoids. Its stainless steel vane table is compatible with all clamping systems on the market, and its plunge cutting motion makes it ideal for routine cutting.
Quick clamping vice right side for T215
Accessory for MECATOME T215 (ref. 51460)
Diamond cut-off wheels Type ELD Ø 200 x 1.8 x 32 mm
ELD diamond discs are grinding wheels with a metal body onto which the diamond is electroplated. This wheel, designed for cutting plastics and composites, also performs well on polyurethane foams, plaster, concrete and rock.
Semi-automatic Hardness tester HZ2-2
Semi-automatic hardness tester. Optical quality, reliability and precision. The HZ2-2 hardness tester is instantly recognizable. 100% made in France, its original design along with its robustness and highly technical capacities make it an essential work tool.
High rigidity of the chassis for a perfect load application.
- Load range : 5gf-2kgf
- Turret: : up to 4 lenses, 2 indenters, 1 touch sensor
- Indenter type : Vickers or Knoop
- 1 load cell
- Nikon objectives for a magnification up to 2000x
- Silent operation
- Major vertical extension: allows a large work space
- 2 LED lighting system: for micro and macroscopy use
- Fixed or manual stage
Key word: hardness