Robust, the MECATOME T265 accepts cutting discs of Ø250 & Ø300mm. Its rotation speeds ranged from 1300 to 4000 RPM allow the use of metallic blades as resinoids. Its L-shaped table allows quick clamping of parts either horizontally or vertically. Options and accessories:
- Magnetic filter (ref. 51271)
- Quick-release nut - Tool-less cut-off wheel change (ref. 51272)
- SUCTION AND EXTRACTION - Mist extraction with fluid recovery (ref. 51273)
- Base cabinet for manual cutting machine (small model) (ref. 51275)
- Left quick clamping vice (ref. 51280)
- Right quick clamping vice (ref. 51281)
- Stainless steel v-type moving jaw for clamping vice 45mm height (ref. 51282)
- Special fragile samples «delrin» thermoplastic moving jaw for clamping vice 45mm height (ref. 51283)
Medium size manual and automatic cutting machine. The spacious MECATOME T330 is a powerful and robust machine which can accommodate very sizeable parts and samples which are longer in length, made from a wide range of materials. The optional X axis drive gives the possibility of carrying out multiple series sectioning. There are four cutting modes: • Manual. • Assisted: a manual cut can be made using the joystick to pilot the table (effortless for the operator). • Automatic: an automatic cut can be made by selecting both the disc rotation speed and the advance speed of the table. Possibility of an impulse cutting mode. • Programmable: an automatic cut can be made using pre-selected parameters. The table (with interchangeable stainless steel pallets) is compatible with most readily available clamping systems.
Manual cutting machine with swing action movement. The MECATOME ST310 is a powerful and robust machine, designed to cut sections from sizeable parts and samples which are longer in length. Equipped with exclusive PRESI swing arm technology, rapid, clean, and effortless sectioning can be carried out, without any risk of burning the sample, resulting in a time saving of up to 60%. This new technology increases the capacity of longitudinal sectioning. The machine’s design means that large volume samples can be accommodated, and the double run of the ‘rod’ enables the sectioning of longer samples to take place. The table (with interchangeable stainless steel plates) is compatible with most readily available clamping systems (including vice-type rapid clamping systems and KOPAL). The cooling tank, equipped with a removable and washable ﬁltration system, guarantees a clean supply of coolant during the cutting process, resulting in perfectly white sections.