Showing all 4 results

Show sidebar
Mecatome T215
Close

Mecatome T215

Ref. 51460
Price on request
Robust and compact, the MECATOME T215 is an automatic micro-cutting machine. Its three programmable motorized axes make it a machine that adapts to all situations. The MECATOME T215 offers numerous work parameters that allow to optimize the cutting of the most complex parts. Accessories :
  • V shaped sample chuck for MECATOME T215 (ref. 51715)
  • Orientable chuck for MECATOME T215 (ref. 51156) to be used with aluminium plates (ref. 51162 et 51163)
  • Vice chuck for longitudinal cuts for MECATOME T215 (ref. 51717)
  • Chuck for small samples for MECATOME T215 (vice type) (ref. 51713)
  • Set of 5 aluminium plates 60 x 25 mm for sample sticking (ref. 51162)
  • Set of 5 aluminium plates 40 x 25 mm for sample sticking (ref. 51163)
  • Mini screw vice for MECATOME T215 (ref. 51722)
  • Vice chuck for longitudinal cuts for MECATOME T215 (length 53 mm) (ref. 51718)
  • Set of 2 flanges ⌀ 35 mm for wheel ⌀ 75 to 100 mm  (ref. 51710)
  • Set of 2 flanges ⌀ 50 mm for wheel ⌀ 100 to 150 mm (ref. 51711)
  • Set of 2 flanges ⌀ 75 mm for wheel ⌀ 150 to 200 mm (ref. 51712)
Close

MECATOME T205

Ref. 51760
Price on request
The MECATOME T205 is a manual precision micro-cutting machine characterized by its robustness and compact design. With a large working space, it allows for cuts with the highest precision and to work on a wide range of materials, from the softest to the hardest. Its powerful motor makes it possible to work at high and constant torque over the entire speed range from 100 to 4000 RPM. Option:
  • Quick-release nut - Tool-less cut-off wheel change (ref. 51725)
Close

Mecatome T210

Ref. 51400
Price on request
Precision automatic micro-cutting machine. A powerful and precise micro-machine designed for sectioning medium sized samples from a wide variety of materials of differing hardness, from the hardest to the softest. The optional X axis drive gives the possibility of carrying out multiple series sections. There are three modes of cutting: • Assisted: a manual cut can be made using the joystick to pilot the table (effortless for the operator) • Automatic: an automatic cut can be made by selecting both the disc rotation speed and the advance speed of the table. Possibility of an impulse cutting mode. • Programmable: an automatic cut can be made using pre-selected parameters. The grooved table (with interchangeable stainless steel pallets) is compatible with most readily available clamping systems.
Close

MECATOME T265

Ref. 51270
Price on request
Robust, the MECATOME T265 accepts cutting discs of Ø250 & Ø300mm. Its rotation speeds ranged from 1300 to 4000 RPM allow the use of metallic blades as resinoids. Its L-shaped table allows quick clamping of parts either horizontally or vertically. Options and accessories:
  • Magnetic filter (ref. 51271)
  • Quick-release nut - Tool-less cut-off wheel change (ref. 51272)
  • SUCTION AND EXTRACTION - Mist extraction with fluid recovery (ref. 51273)
  • Base cabinet for manual cutting machine (small model) (ref. 51275)
  • Left quick clamping vice (ref. 51280)
  • Right quick clamping vice (ref. 51281)
  • Stainless steel v-type moving jaw for clamping vice 45mm height (ref. 51282)
  • Special fragile samples «delrin» thermoplastic moving jaw for clamping vice 45mm height (ref. 51283)