Diamond cut-off wheels Type LM+ ⌀ 75 x 0,3 x 12,7 mm
Delivered with a dressing stick. Metallic bond. High concentration disc to cut hard materials such as: tungsten carbide, silicon carbide, plasma deposit, mounted samples, refractory materials.
Diamond cut-off wheels Type LM ⌀ 200 x 0,9 x 32 mm
Delivered with a dressing stick. Metallic bond. Very polyvalent cut-off wheel, normal concentration, to cut very hard materials such as: ceramics, composites, alumina, sintered carbides, minerals, concretes, stones.
Resinoid cut-off wheels Type T ⌀ 250 x 1,6 x 32 mm
Pack of 10 cut-off wheels. For cutting Titanium, titanium alloys, non ferrous metals.
Resinoid cut-off wheels Type S ⌀ 400 x 3 x 32 mm
Pack of 10 cut-off wheels. For cutting multi-material micro-cutting machine
Resinoid cut-off wheels Type MNF ⌀ 400 x 3 x 32 mm
Pack of 10 cut-off wheels. For cutting aluminium, copper and alloys, non ferrous metals, titanium and alloys.
Resinoid cut-off wheels Type AOF II ⌀ 300 x 1 x 32 mm
Pack of 10 cut-off wheels. For cutting rubber bonded cut-off wheel, thin section cutting, low cross-section sintered steels, hard metal layers.
Mecapress 4
Mecapress 4: latest generation of pneumatic hot mounting press!
Versatile and powerful, it enables high-quality and suitable mountings thanks to automatic
mould recognition.
Cycle times are optimized with the latest generation of moulds.
Mecapress 5
MECAPRESS 5 is a modular hydraulic hot mounting press.
Versatile and powerful, it enables the productionof high-quality, customized mounts thanks to automatic mould recognition.
MECAPRESS 5 can accommodate up to two additional mounting modules, allowing a large number of samples to be processed daily.
Mounting time is significantly reduced with the latest-generation molds.
Mecatome T345
Powerful and precise, the MECATOME T345 is an automatic cutting machine.
Its rotation speeds ranging from 300 to 6000 RPM allow the use of diamond discs as well as resinoids.
Its three programmable motorized axes make it a machine that adapts to all situations.
The MECATOME T345 offers numerous cutting modes which optimize the cutting of the most complex parts.
MECATOME T335
Powerful and precise, the MECATOME T335 is an automatic cut-off machine on its longitudinal axis and manual on its vertical axis. Its rotation speeds range from 1000 to 6000 RPM, allowing the use of metal discs as resinoids.
The MECATOME T335 offers the best of both worlds, with the possibility of making regulated or impulse cuts while retaining the ease of manual cutting.
Quick clamping vice for long sample for T215
Accessory for MECATOME T215 (ref. 51460)