Showing all 2 results

Show sidebar
Mecatome T215
Close

Mecatome T215

Ref. 51460
Price on request
Robust and compact, the MECATOME T215 is an automatic micro-cutting machine. Its three programmable motorized axes make it a machine that adapts to all situations. The MECATOME T215 offers numerous work parameters that allow to optimize the cutting of the most complex parts. Accessories and options:
  • Quick clamping vice left side for MECATOME T215 (ref. 51466)
  • Quick clamping vice right side for MECATOME T215 (ref. 51465)
  • Quick clamping vice for long sample for MECATOME T215 (ref. 51469)
  • Sample chucks (to use only with a transversal table) for MECATOME T215 (ref. 51410)
  • V shaped sample chuck for MECATOME T215 (ref. 51715)
  • Vice chuck for longitudinal cuts for MECATOME T215 (ref. 51717)
  • Orientable chuck for MECATOME T215 (ref. 51156) to be used with aluminium plates (ref. 51162 et 51163)
  • Irregular shaped sample chuck for MECATOME T215 (ref. 51716)
  • Chuck for small samples for MECATOME T215 (vice type) (ref. 51713)
  • Chuck for cylindrical sample for MECATOME T215 (ref. 51714)
  • Base cabinet for manual cutting machine pour MECATOME T215 (large model) (ref. 51470)
  • Kopal holding (ref. 50616)
  • Box of Kopal holders (ref. 50613)
  • Option:Transversal table with motorized movement for MECATOME T215 (ref. 51461)
  • Option: 25L recirculating tank for MECATOME T215 (ref. 51462)
  • Option: Positioning laser for MECATOME T215 (ref. 51463)
  • Option: Suction & extraction (ref. 51464)
Close

Mecatome T210

Ref. 51400
Price on request
Precision automatic micro-cutting machine. A powerful and precise micro-machine designed for sectioning medium sized samples from a wide variety of materials of differing hardness, from the hardest to the softest. The optional X axis drive gives the possibility of carrying out multiple series sections. There are three modes of cutting: • Assisted: a manual cut can be made using the joystick to pilot the table (effortless for the operator) • Automatic: an automatic cut can be made by selecting both the disc rotation speed and the advance speed of the table. Possibility of an impulse cutting mode. • Programmable: an automatic cut can be made using pre-selected parameters. The grooved table (with interchangeable stainless steel pallets) is compatible with most readily available clamping systems.